Clamping systems

Cutter arbor, SK 30, A = 63 mm

to Tool selection

Information

Information
Application: Arbor for single tools with bore or tool sets with bore.
Technical information:

Steep taper design as per DIN ISO 7388, without grooves and notches. Outside dimension A = 63 mm for longer tool length in the machine. Safety device against tool twisting by screw or pin. Arbors are fine balanced. If conical spring washers with safety device against twisting are used, slots are required in the arbor. For suitable mounting device VN 799 0, see section Knives and Spare Parts.
Note: Please comply with the specifications regarding the maximum admissible weight and diameters detailed by the machine manufacturer!

Tool selection
Id Type
d
mm
l
mm
NL
mm
GL
mm
DB
mm
TK
mm
Weight
kg
Stock
42818 Cutting arbor SK30
SK30/A63/d20/l70/L180.8
Type: A
d: 20 mm
l: 70 mm
NL: 74 mm
GL: 215.8 mm
DB: 50 mm
TK: 32 mm
Weight: 1.3 kg
Stock: 2
Stock: available at short notice
42822 Cutting arbor SK30
SK30/A63/d30/l80/L190.8
Type: A
d: 30 mm
l: 80 mm
NL: 85 mm
GL: 226.8 mm
DB: 50 mm
TK: 48 mm
Weight: 1.6 kg
Stock: 2
Stock: available at short notice
  • 42818 Cutting arbor SK30
    SK30/A63/d20/l70/L180.8
    Type: A
    d: 20 mm
    l: 70 mm
    NL: 74 mm
    GL: 215.8 mm
    DB: 50 mm
    TK: 32 mm
    Weight: 1.3 kg
    Stock: available at short notice
    Stock: 2
    Request Price
  • 42822 Cutting arbor SK30
    SK30/A63/d30/l80/L190.8
    Type: A
    d: 30 mm
    l: 80 mm
    NL: 85 mm
    GL: 226.8 mm
    DB: 50 mm
    TK: 48 mm
    Weight: 1.6 kg
    Stock: available at short notice
    Stock: 2
    Request Price

Sales unit consists of arbor with pull stud, clamping screw and conical spring washer (flat design), without spacers.