Cutter arbor with cylindrical shank
Arbor for single tools with bore or tool sets with bore.
Cylindrical shank design. Short design for grooving cutter and sawblades up to widths NB = 10 mm. Long design for one part or multi part tools/tool sets. Safety device against tool twisting by screw or pin. Cutter arbors are fine balanced. If conical spring washers with safety device against twisting are used, slots are required in the cutter arbor.
Note: Maximum admissible speed nmax depends on the mounted tools. Please comply with the specifications regarding the maximum admissible weight and diameters detailed by the machine manufacturer.
With four countersunk screws M6X16. Maximum diameter for circular saw blades = 250 mm.
|Classification (Class.)||TI 501 0 04|
|Product type (Product type)||Clamping arbor|
|Diameter (D)||59 mm|
|Length (L)||102 mm|
|Inside diameter (d)||30 mm|
|Stock availability (Stock)||1|
|Shank dimension (S)||25x60 mm|
|Shank diameter (S)||25 mm|
|Clamping length (l)||4 mm|
|Reference diameter (TK)||48|
available ex stock available at short notice