HW, ZL 10/11 mm, TG 3.8 mm
More images

Minifinger disc cutter, HW, with and without shoulder cutter

HW, ZL 10/11 mm, TG 3.8 mm

For self-locking longitudinal joints for non-supporting components, e.g. panels and strips.

Finger joint machines with cut-off saws.

Workpiece material:
Hardwood and abrasive tropical wood.

Technical information:
HW tipped cutters. Tool body thickness corresponds to finger pitch. Particularly suitable for horizontal joints with and without shoulders. Variable design for defined wood thicknesses from 15 to 80 mm. Suitable for small wood thicknesses. Resharpening area 3.5 mm. Design in DP on request.

ID. 021511

Minifinger joint cutter
Property  Value 
Classification (Class.) WF 620 2
Product type (Product type) Cutter / cutterhead
Cutting material (QAL) HW
Diameter (D) 160 mm
Stock availability (Stock) 1
Maximum RPM (nmax) 9 000 min-1
Cutting width (SB) 3.8 mm
Bore size (BO) 70 mm
Number of teeth (Z) 4
Tool Type (Tool Type) Minifinger joint cutter
Wood thickness (HD) 12 mm
Wood thickness to (HD) 100 mm

available ex stock   available ex stock       available at short notice   available at short notice