Navigation
Clamping chuck for drills with 10 mm shank and driving flat More images
  • Clamping chuck for drills with 10 mm shank and driving flat
  • Clamping chuck for drills with 10 mm shank and driving flat
  • Clamping chuck for drills with 10 mm shank and driving flat
  • Clamping chuck for drills with 10 mm shank and driving flat
  • Clamping chuck for drills with 10 mm shank and driving flat
  • Clamping chuck for drills with 10 mm shank and driving flat
  • Clamping chuck for drills with 10 mm shank and driving flat
  • Clamping chuck for drills with 10 mm shank and driving flat
  • Clamping chuck for drills with 10 mm shank and driving flat

Drill adaptor, quick clamping design

Application:
Quick clamping chuck for drills with 10 mm shank and driving flat for drilling spindles with threaded adaptor.

Technical information:
The drill is held in the chuck by the length adjusting screw (ID 009157). Ideal if the hole diameter must be changed quickly. Quick clamping chucks not in use should be covered using the optional dust cover.
Note: The drill shanks require an appropriate shank and driving flat dimensional tolerance to ensure trouble free operation. Drills from the Leitz range guarantees functional reliability. Speed up to 12000 min-1 (quick change drill adaptor without drill must be covered with the dust cover ID 115521 for speeds exceeding 9000 min-1 to prevent unbalance).

Clamping chuck for drills with 10 mm shank and driving flat

PM 320 0, PM 320 0 55, PM 320 0 56, PM 320 0 57, PM 320 0 58, PM 320 0 59
Machine
BEM
GL
mm
Pic.
ID
LL
 
ID
RL
 
Lehbrink, Nottmeyer (neue Maschinenausführung)45A033102available ex stock Add to enquiry list 033103available ex stock Add to enquiry list
Ayen, Brandt, Holzma, Knoevenagel, Mayer, Reichenbacher, Torwegge, Zubiola45B033104available ex stock Add to enquiry list 033105available ex stock Add to enquiry list
Nottmeyer (alte Maschinenausführung)45C033098available ex stock Add to enquiry list 033099available ex stock Add to enquiry list
Alberti, Biesse, Böttcher & Gessner, Busellato, Goma, Grotefeld, Holz-Her, Hüllhorst, Koch, Morbidelli, Reimall, Torwegge, Vitap (ab Bj. 4/91), Weeke46D033100available ex stock Add to enquiry list 033101available ex stock Add to enquiry list
Weekefrom year of construction 2/04 on40.25E033109available ex stock Add to enquiry list 033110available ex stock Add to enquiry list
UniversalShank D-10 mm50F033106available ex stock Add to enquiry list 033106available ex stock Add to enquiry list

available ex stock   available ex stock       available at short notice   available at short notice

Print

Section 7.3.5

Leitz Service